Leave Your Message

Fanless X86 Embedded IPC Motherboard

PCM-H352 is a compact 3.5-inch fanless X86 industrial motherboard powered by Intel Haswell/Broadwell U-series dual-core 15W CPUs. It comes with onboard 4GB DDR3L 1600MHz memory, dual Gigabit Ethernet, multiple serial ports, multi-display outputs and abundant storage slots including SATA and mSATA. This board supports standard -20℃~+60℃ operation, while its W variant delivers ultra-wide temperature range from -40℃ to +80℃ for harsh environments. Optimized for industrial automation, machine vision and embedded terminals, it runs Windows, Linux and VxWorks with stable, low-power and durable performance.

    description1

    Product Introduction

    3.5-inch motherboard with onboard Intel® Haswell or Broadwell U - series processor

    » Intel® Haswell​ Alternatively, an Intel® Broadwell U- series processor ( dual-core ) , TDP: 15W .

    » Onboard 4GB DDR3L memory ( 1.35V ) , maximum frequency 1600MHz

    » Integrates Intel 7.5th generation graphics core , supporting OpenGL 4.0, OpenCL 1.2, DX11.1, H.264, MPEG2, VC-1)

    » Supports VGA, DVI, LVDS ( 18/24- bit single-channel or dual-channel)

    » Supports Intel 10/100/1000Mbit Ethernet (i5 , i7 (supports AMT9.5) ) , SATA, mSATA and mPCIe

    » Supports USB 2.0 and USB 3.0 , serial port, and GPIO interface

    » DC power connector with locking mechanism ( Input voltage: +12V~+ 19V , + 12V recommended )

    Operating temperature : -20°C to + 60 °C

    » Operating temperature : -40°C to + 75 °C (optional )

    Technical Information

    Plate type 3.5-inch motherboard
    Processor 4th generation Intel® 22nm or 5th generation Intel® 14nm dual-core Celeron, i3, i5, i7
    Support:
    Intel® Core™ Celeron-2980U 1.6GHz 15W
    Intel® Core™ i3-4010U 1.7GHz 15W
    Intel® Core™ i5-4200U 1.6GHz 15W
    Intel® Core™ i5-4210U 1.7GHz 15W
    Intel® Core™ i5-4300U 1.9GHz 15W
    Intel® Core™ i7-4510U 2.0GHz 15W
    Intel® Core™ i7-4650U 1.7GHz 15W
    Intel® Core™ i3-5010U 2.1GHz 15W
    Intel® Core™ i5-5200U 2.2GHz 15W
    Intel® Core™ i7-5500U 2.4GHz 15W
    Memory Onboard 4GB DDR3L memory (1.35V), maximum frequency 1600MHz
    Graphics processing Supports one VGA port with a maximum resolution of 1920x1080 @60Hz
    Supports one DVI port with a maximum resolution of 1920x1080 @60Hz
    Supports one 18/24-bit single-channel or dual-channel LVDS
    Network card Supports 2 Intel processors 10/100/1000Mbit Ethernet, supports AMT9.5 (Intel® Clarkville i218LM and i5, i7)
    SATA Two SATA 1.0/2.0/3.0 standard interfaces, supporting RAID 0, 1, and 5.
    Supports 1 mSATA
    mPCIe Supports 1 mPCIe
    USB Supports 4 USB 3.0/2.0 ports (front panel)
    Supports 4 USB 2.0 ports (3 built-in, 1 mPCIe port occupied).
    Serial port 2 RS232 (5-wire), 3 RS232 (3-wire), 1 RS232 (3-wire), or RS422 or RS485 optional
    IO Supports 8 GPIOs (front-end).
    Sound card ALC662 High-Fidelity Sound Card (Line-in, Line-out, Mic-in)
    Power supply +12V~+19V, +12V is recommended.
    Temperature Operating temperature: -20°C to +60°C (-40°C to +75°C is optional)
    Size 146 mm x 101.6 mm
    Heat dissipation Fanless design (fan optional)
    Operating system Win7, Win8, WES7, WES8, Linux, VxWorks

    Ordering Information

    Model Describe
    PCM-H352-A10-X Display: 1x VGA, 1x 18-bit single-channel LVDS or 24-bit dual-channel LVDS
    PCM-H352-A11-X Display: 1x DVI, 1x 18-bit single-channel LVDS or 24-bit dual-channel LVDS
    PCM-H352-A12-X Display: 1x VGA, 1x DVI, 1x 18-bit single-channel LVDS or 24-bit dual-channel LVDS
    PCM-H352W-A10-X Display: 1x VGA, 1x 18-bit single-channel LVDS or 24-bit dual-channel LVDS
    Temperature: -40°C to +80°C
    PCM-H352W-A11-X Display: 1x DVI, 1x 18-bit single-channel LVDS or 24-bit dual-channel LVDS
    Temperature: -40°C to +80°C
    PCM-H352W-A12-X Display: 1x VGA, 1x DVI, 1x 18-bit single-channel LVDS or 24-bit dual-channel LVDS
    Temperature: -40°C to +80°C
    Annotation: X represents the CPU model, including: 2980U, 4010U, 4200U, 4210U, 4300U, 4510U, 4650U, 5010U, 5200U, and 5500U.

    Contact Us