Leave Your Message
Engineered for mission-critical diagnostic systems, high-bandwidth ultrasound modules, and CT scanner workstations.
Designed specifically to address the stringent electrical, thermal, and mechanical demands of hospital diagnostic environments.
Utilizes compact 3.5-inch Single Board Computer (SBC) form factors with Intel x86 processors, enabling seamless data reconstruction and fast processing in tight CT enclosures.
Supports dual/triple independent 4K high-resolution outputs (DP, HDMI, LVDS/eDP), offering crystal-clear pixel rendering mandatory for DICOM Part 14 imaging standards.
Engineered with isolated serial/LAN ports and optimized PCB layout to meet medical EMC/EMI standard IEC 60601-1-2, safeguarding sensitive imaging sensors against interference.
Long-term availability guarantees product longevity for medical original equipment manufacturers (OEMs), avoiding frequent design re-certifications and reducing operational risks.
In modern clinical diagnosis, Computerized Tomography (CT) scanners, Magnetic Resonance Imaging (MRI) consoles, and portable digital radiography platforms demand unprecedented processing efficiency, continuous operating stability, and compact hardware footprints. The 3.5-inch motherboard for medical equipment and CT imaging workstations has emerged as the definitive standard for embedded computing solution architects worldwide.
Medical imaging systems require parallel processing of raw sensor data acquired by detector arrays. As CT devices transition toward multi-slice spiral scanning (e.g., 64-slice, 128-slice, and higher), real-time image signal processors (ISP) and host control units must manage gigabytes of data per second with microsecond latency. A 3.5-inch x86 embedded motherboard provides the perfect blend of structural compactness (measuring just 146mm × 102mm) and robust I/O bandwidth to serve as the core supervisory controller or dedicated image rendering engine.
Inside a CT imaging gantry or auxiliary operator console, space constraints are notoriously severe. Engineers must fit high-efficiency computing electronics into tight, shielded sub-chassis. The 3.5-inch form factor accommodates powerful multi-core x86 Intel architectures (such as Intel Core, Elkhart Lake, or Celeron SOCs) alongside high-speed DDR4 memory. This enables real-time gantry movement control, patient table positioning, slip-ring data ingestion, and immediate pre-processing of radiographic raw data prior to sending it to primary rendering servers.
| Feature Parameter | Commercial Grade Motherboard | YDSTECH 3.5" Medical Grade Motherboard |
|---|---|---|
| Operating Temperature | 0°C to 50°C | Wide Temperature Range: -40°C to +75°C |
| MTBF & Reliability | 10,000 - 20,000 Hours | > 50,000 Hours Continuous 24/7 Operation |
| EMC / Immunity Standard | Standard FCC / CE Class A | Designed to meet IEC 60601-1-2 Medical Safety Standard |
| Display Interfaces | Single/Dual HDMI/VGA | Dual/Triple Display (DP, HDMI, LVDS, eDP) with DICOM Support |
| Expansion Options | PCIe Slot only | M.2 Key-M (NVMe), M.2 Key-E (WiFi/BT), Mini-PCIe, SIM Socket |
| Lifecycle Support | 1 to 2 Years | 7 to 10+ Years Long-Term OEM Availability |
Hospitals and surgical cleanrooms enforce strict standards regarding airborne dust movement and acoustic noise. Fanless 3.5-inch industrial motherboards utilize heavy-duty aluminum thermal spreaders and passive cooling designs that dissipate heat directly through the chassis exterior. Eliminating mechanical cooling fans dramatically reduces system failure points, eliminates dust accumulation within sensitive optical and high-voltage circuitry, and guarantees zero-noise operation during delicate medical procedures.
Accurate diagnostic interpretation requires exceptional color rendition, precise grayscale balance, and high resolution. YDSTECH’s 3.5-inch medical motherboards feature integrated high-performance Graphics Execution Units supporting multi-channel display interfaces (DP, HDMI, 24-bit Dual Channel LVDS, and eDP). They drive high-density diagnostic monitors capable of displaying complex DICOM images simultaneously across control terminals, allowing radiologists to view real-time MPR (Multi-Planar Reconstruction) and 3D volume-rendered models without latency.
Discover how 3.5-inch industrial motherboards empower medical equipment manufacturers worldwide.
Serves as the main human-machine interface (HMI) for CT operator consoles, managing patient registration, scan protocol selection, real-time exposure monitoring, and image transmission via PACS (Picture Archiving and Communication System).
Provides compact, low-power processing power for portable cart-based and handheld ultrasound machines, processing real-time beamforming data and high-frame-rate B-mode / Doppler ultrasound imaging.
Offers low-latency serial and Ethernet communication (GbE LAN) to interface with spatial tracking hardware, robotic arm micro-controllers, and 3D endoscopic displays inside smart operating rooms.
Delivers wide-input DC voltage tolerance (9V~36V) ideal for battery-operated medical carts, patient monitoring stations, and anesthesia machines requiring continuous uninterruptible operation.
A trusted global leader in industrial embedded computing solutions since 1999.
Shenzhen YDSTECH Electronics Co., Ltd. is a high-tech enterprise specializing in industrial computers. Since the establishment of YDSTECH in 1999, we have been committed to independent research and development, innovation, production and sales of industrial computers, and we own the independent intellectual property rights of our core products.
We consider honesty and pragmatism as our motto and make it our long-term goal to provide customers with cost-effective products. In order to achieve this goal, we work constantly to develop new products, improve our service capabilities and promote the innovation of embedded computer applications to create long-term value and potential growth for our customers.
Our core technical team has over 15 years of experience in this industry, and has been focusing on embedded computer research and development, with rich and solid professional expertise. We believe that attitude means everything, since the establishment of YDSTECH, we have always been committed to work with a conscientious, responsible, attentive, professional, prudent and meticulous attitude, which ensures the high-quality output of the products, years of persistence and experience created our strong R&D team.
YDSTECH has set up a comprehensive quality assurance management system, adopting MSA quality system analysis, implementing rolling quality system audit, TQM, SPC process control and other quality management systems, establishing AVL supplier management system to ensure the quality of raw materials, and introducing rolling product reliability tests to ensure overall product reliability.
Explore our wide range of x86 embedded platforms customized for healthcare equipment OEMs.
